Konica Minolta bizhub 25e - Manual (Page 52)

If an error occurs 3
3-8 bizhub 25e
3.3
3.3 If an error occurs
If an error occurs, the information lamp will illuminate and you will hear an audible beep.
Check the message on the display or on the printed message, and clear the error.
Some errors may not initiate a message on the screen and you may have to press the mode switch key to
display the message.
1
Check the message on the display or on the printed message.
% If you do not see a message on the display, press the
mode switch key to locate the message.
2
Press to turn off the information lamp.
% With some errors the information lamp will not turn off after you press . In this case, clear the
error by following the instructions on the display.
3
Follow the message and clear the error.
d
Errors you can clear by pressing include communication errors and memory over flows.
When a paper cassette is empty, a paper or document has jammed, the toner is empty or a cover has been
left open, you cannot clear the error by simply pressing . In these cases, clear the error following the
displayed instructions. When the error has been cleared the lamp will turn off.
To clear paper or document jams, see page 3-5 or page 3-3.
For details on error messages, see chapter 5 in the Administrator’s Guide.
For details on communication errors, see chapter 9 in the Scan and Fax Guide.