1 setting the overwrite all function, Setting can be made only from the control panel – Konica Minolta bizhub C352P User Manual
Page 67
2
Administrator Operations
2-50
C352P
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
2.8.1
Setting the Overwrite All function
2
Note
When the main power switch is turned off, then on again, wait at least 10
seconds to turn it on after turning it off. if there is no wait period between
turning the main power switch off, then on again, the machine may not
function properly.
Do not leave the machine with the Admin. Setting mode setting screen
left shown on the display. If it is absolutely necessary to leave the ma-
chine, be sure first to log off from the Admin. Setting mode.
0
For the procedure to call the HDD Setting screen to the display, see steps
1 through 3 of “Setting the HDD Password” on page 2-30.
1
Call the HDD Setting to the screen from the control panel.
2
Press the [
)
] key.
3
Press the [,] key to display “Overwrite All.”
4
Press the [Menu/Select] key.
5
Press the [+] or [,] key to select the desired mode.
6
Press the [Menu/Select] key.
c352P_security_E.book 50 ページ ２００７年４月１０日 火曜日 午後７時６分