Konica Minolta magicolor 7450 grafx - Manual (Page 182)

Viewing Printer Status 164
PCL Settings
Tray Chaining If Enable is indicated and the specified
paper tray runs out of paper during print-
ing, a paper tray loaded with paper of the
same size is automatically selected so
printing can continue.
If Disable is indicated and the specified
paper tray runs out of paper, printing
stops.
Tray Mapping Tray Mapping
Mode If On is indicated, Tray Mapping Mode is
enabled. Paper is fed from the physical
tray assigned to each logical tray.
If Off is indicated, Tray Mapping Mode is
disabled.
Logical Tray
0–9 Indicates which physical tray is assigned
to each logical tray.
Item Description