Konica Minolta 8050 User Manual
Page 23
4
Installing the Printer Driver
4-4
IP-418
Installing the Printer Driver Using Plug and Play Under Windows Me/
98SE/98
1
With Windows running, insert the CD-ROM into your computer’s CD-
ROM drive.
2
Turn on the machine.
3
When the machine is ready, connect it to the computer with the USB
cable.
The “Add New Hardware Wizard” dialog box appears.
4
Click [Next], and then select
Search for the best driver for your
device (Recommended)
on the next dialog box.
❍
Click [Next] again.
5
Select [Specify a location], and then click [Browse…].
6
Browse to “Driver\(language)\Win9x” on the CD-ROM, and then click
[OK].
✎
Tip
Select the language you prefer. For example, if you prefer English,
browse to:
Driver\English\Win9x
7
Click [Next], and then follow the instructions that appear on the screen
until you can click [Finish].
8
The “Add New Hardware Wizard” dialog box appears again.
Repeat steps 4 through 7.
✎
Note
Repeat steps 4 through 7 until the installation is completely
finished. This completes the installation of the printer driver.
3S4SC_PCL_QGE.book Page 4 Wednesday, September 15, 2004 9:54 AM