Konica Minolta 8050 - Manual (Page 17)

3 Connecting to a Computer
3-2 IP-418
3.2 Parallel Port Connection
Use the parallel cable to connect the parallel port of the machine to the
parallel port of the computer.
✎
Important!
Be sure to use a shielded parallel cable. Use of an unshielded cable
may result in radio frequency interference.
The parallel port is compatible with IEEE1284 Type B standards.
1 Turn off both the machine and your computer.
2 Connect one end of the parallel cable to the parallel port (printer port)
of the computer.
3 Connect the other end of the cable to the parallel port on the left side
of the machine. Secure the interface cable connectors using the two
clips.
This completes connection of the machine to the computer.
3S4SC_PCL_QGE.book Page 2 Wednesday, September 15, 2004 9:54 AM