Konica Minolta 8050 - Manual (Page 22)

Installing the Printer Driver 4
IP-418 4-3
Installing the Printer Driver Using Plug and Play Under Windows
2000
1 With Windows running, insert the CD-ROM into your computer’s CD-
ROM drive.
2 Turn on the machine.
3 When the machine is ready, connect it to the computer with the USB
cable.
The “Found New Hardware Wizard” dialog box appears.
4 Select Search for a suitable driver for my device (recommended)
in the “Install Hardware Device Drivers” dialog box, and then click
[Next].
The “Locate Driver Files” dialog box appears.
5 Select Specify a location , and click [Next].
6 Click [Browse...] on the next dialog box, browse to
“Driver\(language)\2k_XP” on the CD-ROM, and then click [OK].
✎
Tip
Select the language you prefer. For example, if you prefer English,
browse to:
Driver\English\2k_XP
7 Click [OK], and follow the instructions that appear on the screen until
the “Completing the Found New Hardware Wizard” dialog box
appears.
Click [Finish].
8 The “Found New Hardware Wizard” dialog box appears again.
Repeat steps 4 through 7.
✎
Note
This completes the installation of the printer driver.
3S4SC_PCL_QGE.book Page 3 Wednesday, September 15, 2004 9:54 AM