Konica Minolta bizhub PRESS C6000 - Manual

Part Number: 45097576
February 17, 2011
Copyright 2011 © Electronics for Imaging, Inc.
*45097576*
Upgrading the Fiery PRO 80 80C-KM or
Fiery PRO 80 70-60C-KM Color Server to
System Version 2.0
Overview
This document describes how to upgrade the Fiery PRO 80 80C-KM or Fiery PRO 80
70-60C-KM Color Server to system software version 2.0.
Notify the network administrator at the customer site that some archived jobs may no longer
print after you install version 2.0 system software.
N OTE : The term “Fiery PRO 80 ” is used in this document to refer to the Fiery PRO 80 80C-KM
or Fiery PRO 80 70-60C-KM Color Server.
Contents of this kit
In addition to this document, this kit contains:
• Two 1GB DIMMs — for upgrading the memory from 2GB to 4GB.
• BIOS Upgrade CD — for upgrading the BIOS from version 1.31 to version 1.55.
• One-time use dongle — for upgrading the BIOS from version 1.31 to version1.55.
• Media Package
– System Software Package — System Software version 2.0 for installation on the
Fiery PRO 80 following the BIOS upgrade procedure.
– User Software Package — User Software for installation on client computers; User
documentation CD; printed release notes; additional documentation.
Procedures
The list below is a summary; see the complete procedures in the following pages.
To upgrade the Fiery PRO 80 , perform the following procedures in the order shown below.
1. Install the additional DIMMs (see page 2 ).
2. Upgrade the BIOS (see page 3 ).
3. Install system software (see page 4 ).
Installing system software deletes everything on the HDD. Coordinate with the network
administrator at the customer site before installing system software.
4. Verify the product upgrade (see page 6 ).