Konica Minolta BIZHUB C450 - Manual (Page 64)

Using copy functions 2
C450 2-29
Using copy f
unct
ions
Chapter 2
To select Finishing settings
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Select the desired settings.
– To cancel changes to the settings, touch
[Cancel].
– To cancel a setting, touch the button again to
deselect it.
– If the “Corner Staple”, “2 Staple”, “2-hole Punch”
or “3-hole Punch” setting was selected, touch
[Position Setting], and then touch the button for
the desired position.