Konica Minolta bizhub PRO C6500P - Manual (Page 95)

Troubleshooting 6
Fiery S450 65C-KM Network Scanner 6-1
6 Troubleshooting
If an error message appears when attempting to access the scanner, perform
the following checks:
6.1 Cannot connect to the scanner
When the network cannot be connected, check the following items.
!
Detail
Consult your network administrator about your network settings.
1. Check whether the correct IP address of the scanner has been entered.
If the IP address is not correct, enter the correct one.
2. From the DOS prompt of the PC you use, execute “ping” to the IP address of
the address to which a connection is made to check to see if the connection is
made properly.
e.g. : C:\>ping 192.168.0.1
If the ping test fails, check whether the copier's main power is switched on, and
also check the network cable for proper connection.
3. Check whether the IP router is correctly set.
If it is not correctly set, set it correctly.
4. Trace the routing to the scanner to check whether there are any error conditions
within the network.
If any error conditions are found, eliminate them.
If no error is found and yet the connection to the scanner cannot be established,
contact your service representative.