Konica Minolta BIZHUB C450 - Manual (Page 41)

2 Administrator Operations
2-22 C450
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
2.6 System Auto Reset Function
When access to the Administrator Setting mode by the Administrator of the
machine via the control panel is authenticated, the machine enables setting
of the operation of the System Auto Reset function.
If no operations are performed for a predetermined period of time during ac-
cess to the Administrator Setting mode or user mode (during setting of User
Authentication) from the control panel, the System Auto Reset function au-
tomatically causes the user to log off from the mode. Processing of a specific
function, however, takes precedence over the System Auto Reset function.
That is, even if a predetermined period of time elapses during which no op-
erations are performed, once the processing of the specific function has
been started, the System Auto Reset function does not cause the user to log
off from the mode.
The predetermined period of time, after which the System Auto Reset func-
tion is activated, can be selected from among nine values between 1 min.
and 9 min. System Auto Reset can also be set to [OFF]. If no operations are
performed for 1 min. even with System Auto Reset set to [OFF], the function
causes the user to log off from the mode automatically.
2.6.1 Setting the System Auto Reset function
2
Note
Do not leave the machine with the Administrator Setting mode setting
screen left shown on the display. If it is absolutely necessary to leave the
machine, be sure first to log off from the Administrator Setting mode.
0 For the procedure to call the Administrator Setting mode to the display,
see “Accessing the Administrator Setting mode” on page 2-2.
1
Call the Administrator Setting Mode to the screen from the control pan-
el.
c450_security_E.book 22 ページ ２００７年４月１１日 水曜日 午前１０時３２分