Konica Minolta BIZHUB C450 - Manual (Page 147)

3 User Operations
3-36 C450
Use
r Op
er
at
ions
Chapter 3
7
Click the “User Box Password is changed.” check box and enter the
User Box Password.
? What precautions should be used when entering the User Box
Password?
% In the “Current Password” box, enter the currently set User Box
Password.
% Enter a User Box Password that meets the Password Rules require-
ments in the “New Password” box. For details of Password Rules,
see “Password Rules” on page 1-11.
% Enter the same User Box Password as that entered in the “New
Password” box in the “Retype New Password” box.
8
Click the [Apply].
? What if there is a mismatch in the Current User Box Passwords?
% If there is a mismatch in the Current User Box Passwords, a mes-
sage appears that tells that there is a mismatch in the Current User
Box Passwords. Click [OK] to go back to the screen of step 3. Per-
form steps 3 through 8 once again.
? What happens if the New User Box Password entered does not
meet the requirements of Password Rules?
% If the User Box Password entered in the “New Password” box does
not meet the requirements of the Password Rules, a message ap-
pears that tells that the User Box Password that has been entered
cannot be used. Click [OK] to go back to the screen of step 3. Per-
form steps 3 through 8 once again. For details of Password Rules,
see “Password Rules” on page 1-11.
c450_security_E.book 36 ページ ２００７年４月１１日 水曜日 午前１０時３２分