Konica Minolta KIP Color 80 - Manual (Page 9)

Using FlexiSign with KIP
Configure Media Profiles using the Color Profiler
Prior to configuring the Default Job Settings, it is necessary to create at least two Media Profiles. This
entails copying the Media Names from the KIP Color 80 IPS and then printing of several targets on the
media you intend to use and then using an Xrite Eye One Spectrophotometer to scan the targets.
A. Manually copy the Media Names to the Flexi software.
The Flexi software does not read the media list and names from the KIP Color 80 IPS
automatically. It is necessary to manually copy the media files from a special file and
location on the KIP Color 80 IPS to where the Flexi software is monitoring the media names.
On the KIP Color 80 IPS – locate the file called KIPUNATTEND.DAT in the folder
D: or C:\MONPATH1\LOGDIR\STATINFO.
Location of KIPUNATTEND.DAT
Copy the KIPUNATTEND.DAT or IPSUNATTEND.DAT (C7800) to the Flexi software location:
C:\PROGRAM FILES\SAI\SAI PRODUCTION SUITE\OUTPUTDRIVER\KIP
Note: if the Flexi software is installed on a PC Workstation, this Flexi software location may be
a different location.
Note: In order for the Flexi software to see updated Media Names that have been added
on the KIP Color 80 IPS, it will be periodically necessary to copy the KIPUNATTEND.DAT to the
Flexi software location noted above.