Konica Minolta bizhub 420 - Manual (Page 5)

2.1 Changing the HDD Lock Password
1
Enter the Administrator Mode on the MFP display, Utility/Counter button > Administrator Settings >
Input Admin Password > Security Setting > HDD Settings > HDD Lock Password.
2
Enter the currently registered 20-digit password from the keyboard and keypad.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the HDD Setting screen.
3
Touch [Edit].
?
What happens if there is a mismatch in the HDD Lock Passwords?
If there is a mismatch in the HDD Lock Passwords, a message appears stating that there is a
mismatch in the HDD Lock Passwords. Enter the correct password.
4
Enter the 20-digit HDD Lock Password from the keypad.
5
Touch [OK].
6
To prevent entry of a wrong password, enter the 20-digit HDD Lock Password once again.