Konica Minolta bizhub 420 - Manual (Page 20)

Appendix B Utilizing the Konica Minolta HDD Back Up Utility
The HDD Backup Utility, which is to be installed in the PC of the Administrator of the machine, is
application software used exclusively for accessing the HDD of an MFP. The HDD Backup Utility functions
performed by the Administrator of the machine allow the image data saved in the HDD of the machine to
be backed up and restored. It is not possible to open and review the backup data file directly.
To gain access to the machine from the HDD Backup Utility, the user must be an Administrator with
knowledge of the Administrator Password. The Administrator Password entered during the authentication
procedure is displayed as "*." When the Enhanced Security mode is set to [ON], the number of times in
which authentication fails is counted.
2.1 Backup
In Backup, neither the Administrator Password nor CE Password is backed up.
1
Start the HDD Backup Utility.
2
Select this machine and click [Backup].
3
Enter the Administrator Password registered in the machine in the "Administrator password" box.
If the "Save the administrator password" check box is selected, the Administrator Password
entered is stored in the PC being used. If you do not want the Administrator Password stored,
clear the "Save the administrator password" check box.