Konica Minolta KIP Color 80 - Manual (Page 8)

Color Calibration/Linearization
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2013 KIP. vii.iv
7
Performing a linearization:
 Select the type of Spectrophotometer
 Print linearization target by pressing the 'Print Target'-button
 Measure linearization target by pressing the 'Measure'-button
After the target has been read and processed properly, the dialog shows the date of the day when the
linearization was performed.
Gray Calibration
The Gray Calibration is used to enhance the gray balance, which means that gray colors (R=G=B) should be
perceptually neutral (uncolored).
To check the gray balance a test sheet can be printed: Press 'Print Test Sheet'-button.
If the gray balance is not acceptable like in the extreme example above, a gray calibration should be
performed.