5 transmission to the smb server, When an smb server is already registered, Transmission to the smb server -22 – Konica Minolta IC-413 User Manual
Page 77: Transmission to the smb server (p. 6-22)
bizhub PRESS C7000/C6000
6-22
6.5
Transmission to the SMB server
6
6.5
Transmission to the SMB server
When you send the scanned data to an SMB server, necessary procedures depend on whether the SMB
server is registered in advance or it is input manually.
d
Reference
Refer to the following pages.
When an SMB server is Already Registered: page 6-22
When an SMB server is Input Manually: page 6-24
When an SMB server is Already Registered
1
Press [SCAN] tab.
2
Press [SMB].
% In the initial settings, the Select Addresses screen (E-mail) is displayed. The default destination tab
of the scan screen can be set at [Utility/Counter] - [User Setting] - [Scan Setting]. For details, refer
to page 7-6.
3
Press the Name of the address SMB server.
% You can refine the registered address by the search function. For details, refer to page 3-7.
% You can refine the Name by using [A to Z]. For more information on how to use [A to Z], refer to
% To deselect the Name, press the selected Name again.
% If you input an address manually, refer to page 6-24.