When a box is already registered – Konica Minolta IC-413 User Manual
Page 67
bizhub PRESS C7000/C6000
6-12
6.3
Storing in the Hard Disk
6
When a Box is Already Registered
1
Press [SCAN] tab.
2
Press [HDD].
% In the initial settings, the Select Addresses screen (E-mail) is displayed. The default destination tab
of the scan screen can be set at [Utility/Counter] - [User Setting] - [Scan Setting]. For details, refer
to page 7-6.
3
Press the Name of the user box.
% You can refine the registered address by the search function. For details, refer to page 3-7.
% You can refine the Name by using [A to Z]. For more information on how to use [A to Z], refer to
% To deselect the Name, press the selected Name again.
% If you have not register a box, select the default [guest] box or register a new box. Refer to page 6-14
for more information about method to register a box.