Asus Motherboard P5LD2 - Manual (Page 136)

5-30 Chapter 5: Software support
To create a RAID driver disk in Windows ® environment:
1. Place the motherboard support CD in the optical drive.
2. When the Drivers menu appears, select the RAID driver disk you wish
to create:
• Click Make ICH7 32 bit RAID Driver Disk to create an
Intel ® ICH7 RAID driver disk for a 32-bit system.
• Click Make ICH7 64 bit RAID Driver Disk to create an
Intel ® ICH7 RAID driver disk for a 64-bit system.
Or
Browse the contents of the support CD to locate the driver disk utility:
• ICH7 32-bit RAID Driver Disk
• ICH7 64-bit RAID Driver Disk
Refer to \Drivers\Chipset\Intel\MSM\Readme.txt
9. The RAID drivers are copied to the floppy disk. After creating a RAID
driver disk, eject the floppy disk, then write-protect it to prevent
computer virus infection.
10. Press any key to return to the Makedisk menu.
Refer to section “5.2.2 Drivers menu” for details.
3. Insert a formatted high-density floppy disk to the floppy disk drive.
4. Follow screen instructions to complete the process.
5. After creating a RAID driver disk, eject the floppy disk, then
write-protect it to prevent computer virus infection.
To install the RAID driver:
1. Install an operating system to the selected hard disk drive. During
installation, the computer prompts you to press the F6 key if you are
installing a third-party SCSI or RAID driver.
2. Press , then insert the RAID driver disk to the floppy disk drive.
3. Follow screen instructions to install the RAID drivers.