Asus Motherboard P5LD2 - Manual (Page 134)

5-28 Chapter 5: Software support
Resetting a RAID set hard disks drive
Take caution before you reset a RAID volume HDD to non-RAID. Resetting
a RAID volume HDD deletes all internal RAID structure on the drive.
To reset a RAID set hard disk drive:
1. From the utility main menu, select [3. Reset Disks to Non-RAID], then
press to display the following screen.
Resetting RAID data will remove the internal RAID structures
from the selected RAID disks. By removing these structures
the drive will revert back to a Non-RAID disk.
[ RESET RAID DATA ]
WARNING: Resetting a disk causes all data on the disk to be lost.
Port Drive Model Serial # Size Status
0 STXXXXXXXXX XXXXXXXX XX.0GB Member Disk
1 STXXXXXXXXX XXXXXXXX XX.0GB Member Disk
Select the disk that should be reset
[ ]-Previous/Next [Space]-Selects [Enter]-Selection Complete
2. Use the up or down arrow keys to highlight the RAID set drive you
want to reset, then press to select.
3. Press to reset the RAID set drive. A confirmation window
appears.
4. Press to reset the drive; otherwise, press to return to the
utility main menu.
5. Follow steps 2 to 4 to select and reset other RAID set drives.