Konica Minolta bizhub PRO 950 - Manual (Page 48)

Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 4
bizhub PRO 950 4-17
11
Change the settings according to the port, and then click the [OK].
– For an LPR connection, select “LPR”, and then enter “Print” in the
“Queue name” box.
– For a Port9100 connection, select “RAW”, and then enter the RAW
port number (9100 at default) in the “Port Number” box.
– The information entered here is case-sensitive.
12
Click the [Next].
13
Click the [Finish].
The Add Printer Wizard appears.
14
Click the [Have Disk].
15
Click the [Browse].
16
Specify the desired folder on the Driver CD or PS Driver CD that con-
tains the printer driver, and then click the [Open].
– Select printer driver (PCL, PostScript PPD) to be used.
– For details of the built-in CD-ROM construction, see “Folder struc-
ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on
page 1-6.
17
Click the [OK].
The “Printer” list appears.
18
Click the [Next].
19
Follow the on-screen instructions.
– If the “User Account Control” window appears, click the [Continue].
20
Click the [Finish].
21
When the installation is completed, make sure that the icon of the in-
stalled printer appears in the Printers and Faxes window.
22
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.