Konica Minolta bizhub 751 - Manual (Page 12)

How to Use the Authentication Unit 5
AU-211P 74
!
Detail
On the MFP that supports this system, "Authentication Type" is
automatically set to "GSS-SPNEGO". "Select Server Authentication
Method" is automatically set for user authentication.
5.3.3 Performing an Address Search (LDAP) at the MFP
Use the Fax/Scan screen on the MFP control panel, and press [Address
Search]. The procedures can vary depending on whether a single or multiple
LDAP servers are registered.
2
Note
If address search (LDAP) setting incorrectly configured properly,
[Address Search] will not appear. Check that the address search (LDAP)
setting is configured correctly.
Item Description
LDAP Server Name Specify the LDAP server name (up to 32 characters).
Max. Search Results Enter the maximum number of items that can be
received as address search (LDAP) results.
Timeout Specify the timeout period for address search (LDAP).
Initial Setting for Search
Details Specify address search (LDAP) conditions.
Server Address Specify the conditions of address search (LDAP).
Search Base Specify the search starting point in the directory
structure under the LDAP server (up to 255 characters).
This search function also covers subdirectories under
the specified starting point.
SSL Setting Select "ON" to encrypt communication between the
MFP and LDAP server with SSL.
Port Number Specify the LDAP port number.
Port Number (SSL) Enter the desired port number for SSL communication.
Referral Setting Select whether to use the referral function. Match the
LDAP server environment.
Domain Name Specify the domain name to log in to the LDAP server
(up to 64 characters).