Konica Minolta bizhub PRESS C8000e - Manual (Page 36)

bizhub PRESS C8000 2-29
2.4 Administrator Security Functions 2
2.4.2 HDD Lock Password
When the Enhanced Security mode is activated on the machine mounted with Hard Disk Kit HD-514, a lock
password (8 to 32 alphanumeric characters, case sensitive) can be set up on the HDD. Setting up a lock pass-
word will prevent the leakage of document data by taking out an illicitly-switched HDD. If the HDD itself is
externally accessed, the data readout will not be available until the correct lock password is entered.
NOTICE
Do not use your name, birthday, employee number, etc. for a password that others can easily figure out.
Be careful not to inform anybody else of the password, or not to let it known to others.
1
Press Utility/Counter on the control panel to display the Utility Menu Screen.
2
Press [02 Administrator Setting].
% Please be sure to set up an HDD lock password when using the Enhanced Security mode.
% Press [03 Administrator Setting] for the machine equipped with the optional Paper Feeder Unit
(with scanner) PF-705.
A password entry screen will be displayed.
3
Enter the administrator password.
% Use the touch panel keypad to enter the administrator password consisting of 8 alphanumeric char-
acters, then press [OK].
% Passwords are case sensitive.
% If a wrong password or fewer than 8 alphanumeric characters/symbols are entered and [OK] is
pressed, the warning message [Password is incorrect / Please wait for a while] will appear, and no
key will work for five seconds. Enter the correct password after five seconds.
% The information on failed authentication will be saved in the audit log.