Konica Minolta bizhub PRESS C8000e - Manual (Page 31)

IC-601 4-3
4.2 Send by an E-Mail 4
4.2 Send by an E-Mail
You can send the data read in from the copier's ADF or the original scanning glass (scanned data) to an E-
Mail address as an attached file.
For detailed information on how to operate the function, refer to page 6-4.
4.2.1 Items to be configured
In order to send the scanned data to an E-Mail address, the following items need to be configured.
Address (E-mail address)
Select an E-mail address from the registered addresses, or specify an address as you operate scanning. You
can specify multiple addresses.
For information on how to register an address, refer to page 5-4.
Title
You can choose an E-mail title from 5 types, or you can input a title as you operate scanning.
On how to input a title, refer to page 6-4.
Text
You can choose a text from 5 types, or you can input a text as you operate scanning.
On how to input a text, refer to page 6-4.
7 CAUTION
-
When transmitting a message to the E-mail address, the setting of the Administrator mail address is
required. For details, refer to "Administrator registration" in the User's Guide (POD Administrator's Ref-
erence).
Transmission from the copier is up to the SMTP server. If the network or the POP server has any problem,
the mail may not reach a recipient. When you send an important mail, do not forget to confirm the reception.
7 CAUTION
-
Depending on settings of the recipient server, the size of an attached file is regulated. For details, con-
tact your administrator.
POP server SMTP server
Internet
Original
Scan
Copier