Lenovo Flex 2-15 Notebook Lenovo User Manual
Page 45
Appendix. CRU (Customer Replaceable Units) instructions
41
6 Pull the keyboard connector slot cover upward as shown by arrow
,
detach the keyboard cable from the keyboard connector in the direction
shown by arrow
.
7 Install a new keyboard.
8 Connect the keyboard cable to the keyboard connector.
9 Press the keyboard connector slot cover downward.
0 Place the keyboard into the keyboard bezel, close the computer display.
A Turn the computer over, reinsert and tighten the screw.
B Turn the computer over again.
C Connect the AC power adapter and the cables to the computer.
Note:
A shown in the figure is only applicable to the models with keyboard backlight.
c
d
d
c
d
c
A
This manual is related to the following products: