Aquatic Century 31 AI7048RC31 - Manual

25
SPECIFICATIONS:
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
March 2008
Rough-In Plumbing
Measurements
No alternate pump/blower locations available.
CENTury SErIES
Model # AI7048rc31
CENTury 31
•
Comfort Pillow -- Oval or Rectangle
•
Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel or
Satin Nickel
• Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass,
Satin Nickel, Polished Nickel,
Oil Rubbed Bronze or Gold
•
Lift & Turn Waste and Overflow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
•
Cable Drive Waste and Overflow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color Matched
(Bone, White and Biscuit Only)
•
Hand Held Jet - Chrome or Polished Brass
• Optional Pump Location
•
Remote Pump Location
•
Color Matched Curved Acrylic Skirt
• Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading fixture manufacturers.
oPtIoNal equIPMeNt: GeNeRal SPecIfIcatIoNS:
Tub Size 69 1/2” x 47 1/2” x 29”
177 cm x 121 cm x 74 cm
Bathing Well 43” long
33” wide
23 1/2” interior depth
Shipping Weight 239 lbs. / 108 kg
Tub Weight Filled 1157 lbs. / 525 kg
Weight w/Equipment 178 lbs. / 81 kg
Gallons to Overflow 118 gal. / 447 L
Gallons to Operate 1 bather: 99 gal. / 375 L
2 bathers: 80 gal. / 303 L
electRIcal SPecIfIcatIoNS:
Pump 2 HP; 11 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
Inline Heater 1.5 kW; 12 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
This unit is not recommended for shower installations.
This unit has a 3/4” female waterfall fill spout connection.
12 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 4 Pressure Plus Hydrotherapy Jets
- 3 Recessed Rotary Massage Jets
- 1 Recessed Fan Jet
aquatic quality features:
- 2 HP, 3-Speed Run-Dry Pump
- Bath-Side Electronic Control Panel
- Integrally Molded Fast-Fill Waterfall Spout (valves not included)
- Chromatherapy
- 1.5 kW Inline Maintenance Heater
- ”Quiet Pad”
Anti-Vibration Pump Mount for Quiet Pump Operation
- 2 Extra Deep & Wide Contoured Lounge Seats
- Color Matched or Chrome Bolt-On Grab Bar
- 4 Arm Rests
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
ul & IaPMo listed, factory tested
limited lifetime Warranty
StaNdaRd equIPMeNt:
Two Person Bath
29”
69 1/2”
22”
23 1/4”
27 1/2”
47 1/2”
fax-on-demand
document # 1015
5 1/8”
12 3/8”
Fill Spout Location
47 1/2”
*Not available without fast-fill Waterfall Spout.
4
3
2
1