ATEN CS-1708 - Manual (Page 17)

9
Chapter 2
Installation
Rack Mounting
The CS-1708 / CS-1716 can be mounted in a 1U system rack. For convenience
and flexibility, the mounting brackets can screw into either the front or the back
of the unit so that it can attach to the front or the back of the rack. To rack mount
the unit do the following:
1. Screw the mounting brackets into the sides of the unit at the front or the
rear, as shown in the diagram below.
2. Slide the unit into the rack and secure it to the rack.
1. Important safety information regarding the placement of this
device is provided on page 43. Please review it before
proceeding.
2. Make sure that power to all the devices you will be connecting
up have been turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.
cs1708-1716.book Page 9 Thursday, July 19, 2007 3:06 PM