Lenovo ThinkVantage Access Connections - Manual (Page 10)

1. Using Access Connections, create location profiles. Consider the following scenarios as you create
the location profiles:
• Office and building connections
• Home connections
• Branch-office connections
• Connections while traveling and hot-spot connections
For instructions on how to create location profiles, or how to use Access Connections, see the Access
Connections Help located in the application itself.
2. Create or edit a distribution package with the Administrator Profile Deployment feature.
3. Deploy the distribution package to client systems.
Creating a distribution package
Complete the following steps to create a distribution package:
1. Click on the Advanced button in the upper right (unless already shows as Basic). Then click on the
Tools tab and at the bottom will be Create Distribution Package and Edit Distribution Package.
Click Create Distribution Package.
Figure 2. Locating the Create Distribution Package feature
2. Select the location profiles that you want to deploy. If a profile that is selected contains a wireless profile
with encryption enabled, you will be prompted to re-enter the wireless settings data to ensure sensitive
data is not exposed. When deploying location profiles that provide a wireless network connection,
the donor and recipient must contain wireless adapters which support the capabilities defined in the
location profile.
6 Access Connections Deployment Guide