Lenovo S710 All-in-One - Manual (Page 99)

14. Remove the four screws that secure the chassis to the LCD panel, and then lift the chassis out of
the computer to get assess to the LCD panel.
Figure 36. Removing the four screws that secure the LCD panel
15. Place the computer chassis over the new LCD panel so that the four screw holes align with those in the
chassis. Reinstall the four screws to secure the LCD panel to the chassis.
16. Position the computer main bracket over the LCD panel. Make sure the screw holes in the computer
main bracket align with those in the front bezel.
17. Reinstall all of the 10 screws that secure the computer main bracket to the front bezel.
Figure 37. Reinstalling the 10 screws that secure the computer main bracket to the front bezel
18. Reconnect the LCD panel cable to the system board. See “Locating parts on the system board” on
page 66.
Chapter 9 . Replacing FRUs 93