Lenovo K49 Notebook - Manual (Page 77)

Applying labels to the base cover
The new base cover is shipped with a kit containing labels of several kinds. Apply those labels listed when
you replace the base cover. For the labels which are not shipped with the new base cover, peel them off
from the old base cover, and adhere them to the new one.
Note: If you replace a part with the Windows Certificate of Authentication (COA) label 1 , return the old part
with the label attached to the customer. Otherwise, you can provide the customer with a letter, stating the
original location of the label on the computer and the information on the label, such as the part number,
serial number, and product key.
The following illustration shows the label locations on the base cover.
1 2
3
5
4
2 China label 4 Rating label I
3 ECC label 5 Rating label II
2010 LCD front bezel
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 44
• “1180 LCD unit” on page 67
Chapter 7 . Removing and replacing a FRU 71