Lenovo Y50-70 User Manual
Page 61
57
Lenovo Y40-70/Y40-80/Y50-70/Y50-80/Y50-70 Touch/ Y50-80 Touch
Figure 9. Removal steps of fan assembly and heat sink assembly (continued)
Remove the screws 5.
Step Screw (quantity)
Color
Torque
5
M2.0 × 6.5 mm, flat-head, nylok-coated (6)
THERMAL MODULE(CPU) to MB (Y50-70/
Y50-80/Y50-70 Touch/Y50-80 Touch)
Black
2.5 kgf*cm
Remove the heat sink assembly in the direction shown by arrow 6.
When installing:
• Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
• Make sure that the connector is attached firmly.
This manual is related to the following products: