Replacing a memory module – Lenovo B485 Notebook User Manual
Page 58
5
6
4
8. Attach the connector of the new keyboard.
9. Insert the keyboard. Make sure that the rear edge of the keyboard is under the frame.
10. Slide the keyboard into place.
11. Close the computer display, and turn the computer over. Reinstall the screws to secure the keyboard.
12. Reinstall the computer cover, and then reinstall the screws to secure the cover.
13. Reinstall the battery. See “Replacing the battery” on page 31.
14. Turn the computer over again. Connect the ac power adapter and all cables.
Replacing a memory module
Before you start, print these instructions.
Prerequisites for the procedure
Note: The operating speed of the memory module has dependency on the system configuration. In some
conditions, the memory module in your computer might not be able to operate at the maximum speed.
Attention: Before you start installing a memory module, touch a metal table or a grounded metal object. This
action reduces any static electricity from your body. The static electricity could damage the memory module.
To replace a memory module, refer to the instructions for the computer.
•
“Lenovo B480 and B485” on page 42
•
Lenovo B480 and B485
To replace a memory module, do the following:
42
User Guide