Lenovo K23 Notebook - Manual (Page 60)

46
Chapter 5. Troubleshooting
Computer screen problems
The screen is blank. • Do the following:
- If you are using the AC adapter, or using the
battery, and the battery status indicator is on, press
Fn
+ ↑ to make the screen brighter.
- If the Power indicator is blinking, press the power
button to resume from the standby mode.
- If the problem persists, follow the solution in the
following problem “The screen is unreadable or
distorted.”
- Press Fn+F2 to confirm whether the LCD screen
has been turned off.
The screen is unreadable or
distorted. • Make sure that:
- The display device driver is installed correctly.
- The screen resolution and color quality are
correctly set.
- The monitor type is correct.
Incorrect characters appear
on the screen. • Did you install the operating system or application
program correctly? If they are installed and
configured correctly, have the computer serviced.