Lenovo K23 Notebook - Manual (Page 120)

106
Appendix E. Notices
The Wake on LAN
®
function is set to Enable when your Lenovo computer is
shipped from the factory, and the setting remains valid even when the
computer is in Sleep or Standby mode. If you do not need to have Wake on
LAN set to Enable while your computer is in Sleep or Standby mode, you
can reduce the power consumption and prolong the time in Sleep or Standby
mode, by switching the setting of Wake on LAN for Sleep or Standby mode
to Disable. To switch the setting of Wake on LAN, go to Device Manager and
do as follows:
For Windows XP:
1
Click Start → Control panel.
2
Click Performance and Maintenance → System.
3
Click the Hardware tab, and click Device Manager.
4
In the Device Manager window, expand Network adapters.
5
Right-click your network adapter device, and click Properties.
6
Click the Power Management tab.
7
Clear the Allow this device to bring the computer out of standby
check box.
8
Click OK.