Replacing the system board – Lenovo 3000 C305 All-In-One User Manual
Page 61
Chapter 7. Replacing hardware
59
5
2
3
7
4
1
6
9. Set the new heat sink on the CPU, aligning the seven screws in the
heat sink with the screw sockets in the chassis.
10. Tighten the seven screws on the heat sink.
11. Connect related cables to the underside of the system board.
12. Place the system board upside down.
13. Place the system board into the chassis, aligning the screw holes on
the system board with the mounting holes on the chassis.
14. Screw back the eight screws on the system board.
15. Connect related cables to the upside of the system board.
16. Install the LCD panel. Refer to steps 5 to 6 of the “Replacing the LCD
panel” section.
17. Install the computer cover. Refer to “Completing the installation” .
Replacing the system board
To replace the system board
1. Remove the computer cover. Refer to “Removing the computer cover” .
2. Remove the LCD panel. Refer to steps 2 to 4 of the “Replacing the LCD
panel section” .
3. Remove the wireless card. Refer to the steps 3 to 5 of the “Replacing
the wireless card” section.
4. Remove the TV tuner card. Refer to the steps 3 to 5 of the “Replacing
the TV tuner card” section.