Lenovo 3000 C305 All-In-One - Manual (Page 51)

Chapter 7. Replacing hardware
49
7. Screw back the metal bracket to the new optical drive.
8. Slide the new optical drive into the drive bay and screw the optical
drive back to the chassis.
9. Connect the ODD data and power cables to the optical drive.
10. Install the LCD panel. Refer to steps 5 to 6 of the ”Replacing the LCD
panel“ section.
11. Install the computer cover. Refer to ”Completing the installation“ .
Replace the Inverter board
To replace the inverter board
1. Remove the computer cover. Refer to ”Removing the computer cover“ .
2. Remove the LCD panel. Refer to steps 2 to 4 of the ”Replacing the LCD