Lenovo 3000 C305 All-In-One - Manual (Page 48)

Hardware Maintenance Manual
46
7. Slide the hard disk drive out of the drive bay.
8. Install the new hard disk drive.
(1.) Insert the new hard disk drive into the drive bay.
(2.) Screw back the four screws on the drive bay.
9. Screw back the hard disk drive bay back to the chassis.
10. Connect the data and power cables back to the hard disk drive.
11. Install the LCD panel. Refer to steps 5 to 6 of the ”Replacing the LCD
panel“ section.
12. Install the computer cover. Refer to ”Completing the installation“ .