beautypg.com

Important notice for replacing a system board – Lenovo B470e Notebook User Manual

Page 34

background image

Attention: The drive startup sequence in the computer you are servicing may have been changed. Be
extremely careful during write operations such as copying, saving, or formatting. If you select an incorrect
drive, data or programs can be overwritten.

Important notice for replacing a system board

Some components mounted on a system board are very sensitive. Improper handling of a system board can
cause damage to those components, and may cause a system malfunction.

Attention: When handling a system board:

• Do not drop a system board or apply any excessive force to it.

• Avoid rough handling of any kind.

• Avoid bending a system board and hard pushing to prevent cracking at each BGA (Ball Grid Array) chipset.

Important information about replacing RoHS compliant FRUs

RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive
(2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS
requirements must be implemented on Lenovo products placed on the market after June 2006. Products
on the market before June 2006 are not required to have RoHS compliant parts. If the original FRU parts
are non-compliant, the replacement parts also can be non-compliant. That is, if the original FRU parts are
RoHS compliant, the replacement part also must be RoHS compliant.

Note: RoHS and non-RoHS FRU part numbers with the same fit and function are identified by the unique
FRU part numbers.

Lenovo plans to transit to RoHS compliance before the implementation date and expects its suppliers to be
ready to meet Lenovo’s requirements and schedule in the European Union. Products sold between 2005
and 2006 might contain some RoHS compliant FRUs. The following statement pertains to the products
with RoHS compliant FRUs.

RoHS compliant FRUs have unique FRU part numbers. Before or after the RoHS implementation date, the
failed RoHS compliant parts must be replaced with compliant parts and only the following FRUs can be
used: identified as compliant in the Hardware Maintenance Manual or direct substitutions can be used.

• Compliant FRUs identified in Hardware Maintenance Manual

• Direct substitutions with different FRU part numbers automatically shipped by the distribution center at

the time of order

For products shipped after June 2006

Current or original part

Replacement FRU

Must be RoHS

Must be RoHS

28

Hardware Maintenance Manual