Lenovo IdeaPad U330 Touch Notebook - Manual (Page 45)

Lenovo IdeaPad U330p/U330 Touch/U430p/U430 Touch
41
Figure 3. Removal steps of hard disk drive (continued)
U430p/U430 Touch: Hold the SATA receptacle connector with one hand and
pull the hard disk drive (secured in the metal frame) in the direction shown
below to detach the connector.
Remove four screws and detach the metal frame from the hard disk drive.
When installing: Make sure that the HDD connector is attached firmly.
Step Screw (quantity) Color Torque
M3.0 × 3.5 mm, flat-head, nylok-coated
(4) Silver 3.0±0.2 kgfcm
c
c
c
c
c
c