Lenovo ThinkCentre A62 - Manual (Page 70)

Selecting or changing the startup device sequence
To view or permanently change the configured startup device sequence, do the
following:
1.
Start the Setup Utility program (see “Starting the Setup Utility program” on
page 59).
2. Select Startup and read the information displayed on the right side of the
screen.
3. Select the devices for the Primary Boot Sequence, the Automatic Boot Sequence,
and the Error Boot Sequence.
4. From the Setup Utility menu, select Exit → Save Changes and Exit.
If you have changed these settings and want to return to the default settings, select
Load Optimal Defaults
on the Exit menu.
Exiting from the Setup Utility program
After you finish viewing or changing settings, press Esc to return to the Setup
Utility program menu (you might have to press Esc several times). If you want to
save the new settings, select Save Changes and Exit. Otherwise, your changes will
not be saved.
62 User Guide