Lenovo Y70-70 Touch Notebook - Manual (Page 50)

46
Y70-70 Touch/Y70-80 Touch Hardware Maintenance Manual
Figure 9. Removal steps of fan assembly and heat sink assembly (continued)
Remove the screws 5.
5
5
5
5 5
5
Step Screw (quantity) Color Torque
5 M2.0 × 6.5 mm, flat-head, nylok-coated (6)
THERMAL MODULE(CPU) to MB
Black 2.5 kgf*cm
Remove the heat sink assembly in the direction shown by arrow 6.
6
When installing:
• Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
• Make sure that the connectors are attached firmly.