Lenovo IdeaPad S210 Touch Notebook - Manual (Page 45)

Lenovo S210/S210 Touch/S215/S215 Touch
41
1050 Fan assembly and Heat Sink assembly
For access, remove this FRU:
• “1010 Battery pack” on page 34
Figure 5. Removal steps of fan assembly and heat sink assembly
Loosen four screws , and remove the heat sink assembly.
Unplug the fan connector in the direction shown by arrow , Loosen three
screws .
When installing: Make sure that the fan connector is attached firmly to the
system board.
Step Screw (quantity) Color Torque
M2 × 3 mm, flat-head, nylok-coated (3)
M2 × 5 mm, flat-head, nylok-coated (2) Black
Black 1.35 kgfcm
1.85 kgfcm
a
a
a
a
a
b
c
b
c
c
c
a