Lenovo IdeaPad U310 - Manual (Page 78)

Lenovo IdeaPad U310/U410 U310/U410 Touch Hardware
Maintenance Manual
74
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
label:
The following labels need to be peeled off from the old base cover, and need
to be put on the new base cover.
e-Standby Label (KOR)
COA Label
Israel WLAN Label
WL Label
BT Label
KCC Label or WLAN Label for Malaysia/Indonesia
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figure:
U310/U310 Touch: U410/U410 Touch:
b
c
d
e
f
a
a
b d
e
c
f