Lenovo ThinkVantage Rescue and Recovery 4.3 (Deployment Guide) - Manual (Page 39)

03/10/04 00:00:00 AM 165 BOOT.INI
08/16/02 00:00:00 AM 53786 COMMAND.COM
12/16/03 00:00:00 AM 222 CONFIG.ICR
12/16/03 00:00:00 AM 222 CONFIG.SYS
04/06/00 00:00:00 AM 655 FINDDRV.BAT
09/17/03 00:00:00 AM 14320 HIMEM.SYS
3. An optional command line input will be a text file to capture the output of this
option.
4. Sample command: RRUTIL /lx [dirlist.txt] Note: Enablement of the
optional entry may be deferred to a later release.
The following list provides the values for x:
v 1 \preboot
v 2 \minint
v 4
Multiple listings would be simple addition of each x. So \preboot and \minint
would be a value of 3. dirlist.txt contents:
\minint\system32\drivers*.sys
\preboot\startup\*.*
Get files from Predesktop Area directories
RRUTIL /g getlist.txt
Copy individual files from the \preboot, \minint , or root of the PE partition either
virtual or type 0x07:
1.
A text file identifies the files that should be copied to a location specified in the
command line.
2. The must be an existing directory that will receive the files
from the Predesktop Area. The files will be copied in this directory in same tree
structure as they are found in the Predesktop Area. This will avoid same name
files from copying over each other.
3. Sample command: RRUTIL /g getlist.txt getlist.txt
contents:
\PELDR
\preboot\startup\Restore.cmd
\preboot\usrintfc\PDAGUI.ini
Note: Wildcards are not supported in this function. You must understand the
Predesktop Area environment before attempting any modifications.
Put files in the Predesktop Area directories
RRUTIL /p
Update (add/replace) files in \preboot, \minint, or root of the PE partition either
virtual or type 0x07:
1.
Place all the files in a temp folder on drive c:\. Based on location in the temp
directory, the files will be copied into the PE partitions in the same locations.
For example, to add/replace a file.cmd file in \preboot\startup, the user would
place the file.cmd file in c:\tempdir\preboot\startup and then run the
command “RRUTIL /p c:\tempdir”.
2. Sample Command: RRUTIL /p c:\PDATemp contained in c:\PDATemp would
be a mirror image of the directory structure of \preboot, \minint, or root of
Predesktop Area. The files in the root of c:\PDATemp would put the files in the
root of the PE partition.
Chapter 3. Configurations 31