Kodak DP1100 - Manual (Page 2)

Using the Remote Control
For best results, point the remote directly at the projector.
Using the Keypad
While the menu is displayed, the volume, source, and standby buttons act as navigation buttons.
Use them to select menu items and move to different menus.
Turning Off the Projector
To turn off the projector for a short period of time, press the button on the keypad or
remote control.
To completely turn off the projector, press the “0” side of the power switch on the side of
the projector.
Always unplug the projector from the wall outlet before unplugging the cord at the projector.
Safety Instructions
Safety Definitions
• Warning: Statements identify conditions or practices that could result in permanent personal injury.
• Caution: Statements identify conditions or practices that could result in damage to your equipment.
Safety Symbols
Attention: For information about use of a
feature, please refer to the Reference Manual.
Warning: Hot surface. Do not touch.
An arrow pointing to the lamp door on the projector.
Safety Terms:
• Warning: Don’t look directly into the lens when the projector is turned on.
• Warning: Don’t block ventilation openings.
• Warning: To replace the lamp, turn the power off and unplug the power cord. To
avoid burns, wait 30 minutes before opening the lamp door.
• Warning: Please use the power cord provided. Connect the power cord to a receptacle
with a protective safety (earth) ground terminal.
• Warning: Refer all service to qualified service personnel. Servicing your own projector will void the warranty.
• Caution: Don’t set liquids on the projector. Spilled liquids may damage your projector.
• Caution: Don’t place the projector on a hot surface or in direct sunlight.
• Caution: Do not drop the projector. Transport the projector in a Kodak-approved case.
DP900/1100 Digital Projectors
Menu button – displays the menu
Volume –
increases
volume
Standby – turns off the
image without turning off
the projector
Simulates left and
right mouse buttons –
use to adjust settings
Volume –
decreases
volume
Source button – toggles back and
forth between video and computer
sources
Online registration is quick and easy!
www.kodak.com/go/register
Register your new projector now!
EASTMAN KODAK COMPANY
Rochester, NY 14650
© Eastman Kodak Company, 1999 Printed in the U.S.A. 8/99
Simulates the right
mouse button – use to
adjust settings
Standby – turns off the image
without turning off the projector
Computer – selects the
computer as the source
Simulates the left mouse button –
use to adjust settings
Menu – displays the menu
Disk Mouse – use to select
menus and menu items
Video – selects the video player
as the active source