Kodak 4 MP - Manual (Page 86)

79 www.kodak.com/go/support
Troubleshooting
Synchronization and transfer
Problem Cause and/or solution
Synchronization/
transfer stops or does
not start ■ The computer has entered standby or hibernation.
■ The camera is disconnected (during authentication and setup),
possibly due to:
– Camera turning off
– Distance (weak signal)
– Interference (such as a microwave oven or a cordless
telephone)
– The wireless router shutting down
– Wi-Fi card not properly inserted
■ Synchronization/transfer is not set in EasyShare software (see
EasyShare software Help for details).
■ Set up and authenticate the camera on EasyShare software (see
EasyShare software Help for details).
Synchronization/
transfer is slow ■ The network is slow possibly due to:
– Distance (weak signal)
– Interference (such as a microwave oven or a cordless
telephone)
■ The computer is slow, possibly due to:
– Processing other tasks
– Disk space is full
– Low processor speed
■ The wireless router is set to slow transfer rate.
Incomplete transfer or
missing images ■ There is not enough disk space left on the computer.
■ The transfer was interrupted (see above).