Kodak Z980 - Manual (Page 21)

Taking pictures/videos
www.kodak.com/go/support 15
Using the Drive button
Using the self-timer
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. Place the camera on a tripod or flat surface.
1 In any picture-taking mode, press the Drive button until the desired self-timer icon
is displayed on the LCD.
10 seconds— A picture is taken after a 10-second delay (so you have time
to get into the scene).
2 seconds— A picture is taken after a 2-second delay (for a steady, shutter
release on a tripod).
2 shot— The first picture is taken after a 10-second delay. A second picture
is taken 8 seconds later.
2 Press the Shutter button halfway to focus and set exposure, then completely
down to take the pictures.
The camera takes the picture/pictures after the delay.
Use the same procedure to take a 2- or 10-second self-timer video, but press the
Shutter button completely down.
Press the Drive button repeatedly to scroll through
self-timer and burst modes.
The current flash mode is shown on the LCD.
10
2
2x