While the printer is printing, Removing the perforated tabs from the paper, Printing from a pictbridge compatible device – Kodak 500 User Manual
Page 14
8
www.kodak.com/go/support
Printing without a computer
While the printer is printing
When printing, the paper cycles four times. The first three passes apply layers of
yellow, magenta, and cyan colors to the print. The fourth pass applies the Kodak
XtraLife
TM
coating that protects and preserves the image
Removing the perforated tabs from the paper
1 Fold the tabs up, then down.
2 Remove each tab and discard.
NOTE: Remove perforated tabs only after printing. Paper missing
perforated tabs will not feed properly.
Printing from a PictBridge compatible device
The Kodak EasyShare photo printer 500 offers PictBridge technology, which lets you
print from a PictBridge compatible device (such as a digital camera or camera phone).
1 Plug the USB connector from the PictBridge
compatible device into the USB device connector.
Turn on the device (if applicable).
The current picture appears on the LCD.
2 To print, see your device user’s guide.