Kodak DP800 - Manual (Page 3)

7 6
4 Connecting the Projector to your video player
Using composite video
1 . Find the Composite video cable, and the audio
c a b l e. All cables and adapters are provided with
the Pro j e c t o r.
2 . M a ke sure that the video source and the
P rojector are switched off. Connect the
Composite video cable from the Video out
connector of the video source to the Composite
video connector on the Projector plug panel, s e e
f i g .4 . Connect the audio cable from the Audio out
connectors of the video source to the Composite
Audio in connectors on the Pro j e c t o r. C o n n e c t
the red plug to the red connector, and the other
plug to the white connector. Red is the right
s t e reo channel.
3 . Connect the power cable from the Projector to
the wall outlet.
4 . When all the connections are done and ve r i f i e d ,
switch on the video sourc e, and then switch on
the Pro j e c t o r.
5 . The Projector will now automatically display the
p i c t u res from the video sourc e. If not, see the
section Trouble shooting.
You can connect external speakers to the Pro j e c t o r
f rom the Audio out connectors on the plug panel.
Using Scart video
The signals from the Scart connector are the same as
f rom the Composite connector. If you have a Scart
connector on your video, you will have to purchase a
S c a rt to Composite interc o n n e c t i o n . Connect the
S c a rt end of the interconnection cable to your video,
and then fo l l ow the pro c e d u re in the previous section,
Using composite video.
Plug panel
Connect to video
out part of V C R R L
Connect to VCR audio out
F i g .4 . Connecting to a composite video source
Using composite video
1 . Find the SuperVideo cable. All cables and adap t e r s
a re provided with the Projector .
2 . M a ke sure that the video source and the
P rojector are switched off. Connect the
SuperVideo cable from the S-video out
connector on the video source to the S-video
connector on the Projector plug panel, see fig. 5 .
Connect the audio cable from the audio out
connectors on the video source to the S-video
Audio in connectors on the Pro j e c t o r. C o n n e c t
the red plug to the red connector, and the other
plug to the white connector. Red is the right
s t e reo channel.
3 . Connect the power cable from the Projector to
the wall outlet.
4 . When all the connections are done and ve r i f i e d ,
switch on the video sourc e, and then switch on
the Pro j e c t o r.
5 . The Projector will now
a u t o m a t i c a l ly display the pictures from the video
s o u rc e. If not, see the section Trouble shooting.
You can connect external speakers to the Pro j e c t o r
f rom the Audio out connectors on the plug panel.
Using external speakers
You can connect external speakers to the Projector in
t wo way s :
1 . Powe red speakers (Speakers with built in
a m p l i f i e r ) .These speakers can be connected
d i re c t ly to the audio out connectors on the
P rojector amplifier.
2 . A m p l i f i e r. Connect the amplifier to the audio out
on the Pro j e c t o r.
When external speakers are connected,These can be
turned on or off from the Pro j e c t o r.
Plug panel
Connect to V C R , S-video out.
F i g .5 . Connecting to a SuperVideo source
0510 CD-Inledning.ENG 12-03-98 16:40 Side 6