Kodak PALM m100 - Manual (Page 9)

7
Preparing the Camera
Connecting the Camera
For the camera to work, it must be connected to a PALM m100 Handheld that has
the PALMPIX Software installed.
When the camera is connected, the lens faces the back of the PALM handheld.
1 Align the PALM handheld connector
and the camera connector.
2 Push the camera and PALM handheld
together until they lock in place.
3 To remove the camera, pull it away
from the PALM handheld.
CAUTION: Do not remove the camera during a picture transfer (page 11).
Doing so may cause you to lose picture data or information.