Kodak EX811 - Manual (Page 15)

Set up your wireless frame
www.kodak.com/go/digitalframesupport 15
Enter security key (if you have security enabled)
If you have wireless network security enabled, the on-screen keyboard appears and
you are prompted to enter your security key. If not,
go to step 6.
4 Enter your security key on the on-screen keyboard. On the remote control, press
to highlight each character. Press OK after each character.
NOTE: A WEP key can be either:
5 or 13 characters (0-9, A-Z, some special characters, case sensitive),
10 or 26 characters (0-9, A-F, not case-sensitive).
A WPA key is 8-63 characters, case sensitive.
The person who set up your network can provide you with this information.
5 Highlight Done on the keyboard, then press OK on the remote control.
The Connecting screen appears, then acknowledges that you are connected!
back
OK
menu Keyboard tip:
= clear all
= backspace
Clear
<-
OK